Nordcap 45110250, Инструкция по эксплуатации

Страница: 41 / 97

P2M054STD-Ver1.2
GB
Operation
KEY COMBIANTIONS:
+
Keyboard UNLOCK or LOCK combination: lock status does not allow editing the
parameters while the instrument function are still active.
+
Enter in the programming mode.
+
Return the room temperature display.
LED ICON DISPLAY LEGENDA:
If switch ON a Defrost cycle is in progress.
If switch ON a Chilling cycle is in progress; if flashing cycle has been selected.
If switch ON a Freezing cycle is in progress; if flashing cycle has been selected.
If switch ON a HARD blast mode chilling cycle is in progress.
If switch ON a temperature-controlled cycle is in progress; if flashing cycle has bee selected
(Temperature is detected by Needle probe “ n2P” ).
If switch ON blast chiller is in “ Stand-by ” mode.
If switch ON a time-controlled cycle is in progress; if flashing cycle has bee selected
(Temperature is detected by Chamber probe “ rNP” ).
If flashing a “ Storage ” cycle is in progress (Temperature is detected by Chamber probe
“rNP” ).
If switch ON a “ Frost buster -40°C ” cycle is in progress (Temperature is detected by Chamber
probe “rNP” ).
+
If switch ON a “ ICE CREAM ” cycle is in progress, if both of the icons flashing a cycle has been
selected (Temperature is detected by Chamber probe “rNP” ).
If switch ON an ALARM is in progress, check “trouble shooting” instruction (Page.29)
Note: Alarm icon/Alarm displayed labels :
- When the are one or more than one alarm events, it or them must be visible on the
display and buzzer will be
ON (Acoustic alarm)
- Whatever button will be pushed, the buzzer will be switched OFF , but the alarm icon and
label will be still visible.
- The alarm icon and labels will be visible until the user will check and acknowledge the
alarm situation. Press button for
5s to manual reset.
41