23
6.1.8
STEP 8: Boom Geometry Tuning
•
Do not activate any hydraulic functions during this step.
↓
↓
Release
⇒
↓
Switch
•
Release the "
AUTO (YES)
" switch to continue.
Exit cab
↓
⇒
↓
push
⇒
↓
boom tip
⇒
near to
⇒
↓
ground
⇒
↓
&
let go
•
Exit the cab of the machine and manually push either boom tip near to
the ground for a moment and then let go. *
CAUTION!:
DO NOT WALK NEAR THE SENSORS WHEN APPROACHING
THE BOOM. STAY AT LEAST 3 FEET FROM THE SENSOR IN
ORDER NOT TO INDUCE MEASUREMENT ERROR.
•
Push either boom tip such that the tip moves at least 15 inches (more if
you can).
•
Once the control panel has detected your sprayer's geometry, the next
menu prompt will appear.
•
Toggle "
SETUP (NO)
" or toggle and hold "
AUTO (YES)
" at this
menu to accept the default parameters and continue.
*This
s
tep is not applicable to system type GN2
