21
6.1.6
STEP 6: Wiring Test *
⇒
↓
Press
⇒
↓
Left Up
•
Use the sprayer's manual controls to move the left boom up.
•
If the wrong boom moves or if the direction is incorrect, stop the setup.
Consult the UC4+ Installation Manual to check the hydraulic plumbing
and electrical wiring of your system. Turn on the control panel again to
resume the system setup.
↓
Left
↑
OK
•
Control panel confirms the wiring is correct.
•
Continue the process with the remaining booms, as shown below.
Lower
Left
Boom
⇒
↓
Press
⇒
↓
Left Dn
Raise
Right
Boom
⇒
↓
Press
⇒
↓
Rght Up
Lower
Right
Boom
⇒
↓
Press
⇒
↓
Rght Dn
** Raise
Main
Boom
⇒
↓
Press
⇒
↓
Main Up
** Lower
Main
Boom
⇒
↓
Press
⇒
↓
Main Dn
*
Some sprayer types do not support a wiring test or they may support a
different style of test. If you do not see any of the messages in this step, simply
continue as prompted by the panel.
** These prompts are only shown for sprayer types that support automatic
main boom height control.
