Nokia IP290 - Security Appliance, Руководство по установке

Страница: 57 / 81

Replacing or Upgrading Memory
Nokia IP290 Security Platform Installation Guide 57
The IP290 appliance comes with either 1 or 2 GB of RAM using 1-GB DIMMs, and a 1-GB
system can be upgraded to 2 GB of RAM with the addition of a 1-GB DIMM.
Nokia products support only memory kits purchased from Nokia or Nokia-approved resellers.
For further information, contact the appropriate Nokia customer support site listed in
“Nokia
Contact Information” on page 3.
The DIMM sockets are located on the left rear of the IP290 appliance motherboard, as you look
at the appliance from the front, as
Figure 15 shows.
Figure 15 DIMM Socket Locations
Before You Begin
To upgrade or replace your appliance memory, you need:
„
Physical access to the appliance
„
Nokia memory upgrade kit
„
Access to the appliance by using Nokia Network Voyager or command-line interface (CLI)
„
A Phillips-head screwdriver
„
Grounding wrist strap
00569
IP290
STATUS
SLOT 1
AUX
RESET
1
3
5
2
4
6
CONSOLE
POWER
FAULT
1000BaseT
LINK
ACT
LINK
ACT
DIMM sockets