Nokia 9000 Скачать руководство пользователя страница 8

Страница: 8 / 106

1-2

Important safety information

The phone interface is designed for quickly mak-

ing and receiving calls. It looks and operates like

other Nokia cellular phones (except that the ear-

piece and microphone are on the backside of the

device). The phone interface is switched on and
off by pressing the

button on the cover.

IMPORTANT!

Do not switch on the phone inter-

face when cellular phone use is prohibited or

when it may cause interference or danger.

The communicator interface has many organiser

and communication applications. The QWERTY

keyboard, command buttons and large display

make using the applications easy. The communi-

cator interface has no power on/off button – the

communicator interface activates itself when

you open the cover and deactivates when you

close the cover.

Important safety information

Traffic safety

• Do not use the communicator while driving a

vehicle. Park the vehicle before using the

communicator.

• Always secure the communicator in its

holder, and ensure that the locking mech-

anism on top of the holder is properly

engaged; do not place the communicator on

the passenger seat or where it can break loose

in a collision or sudden stop.

• The use of an alert device to operate a

vehicle’s lights or horn on public roads is not

permitted.

• Remember, road safety always comes first!

Operating environment

• Remember to follow any special regulations

in force in any area, and always switch off

your communicator’s phone interface

whenever it is forbidden to use a cellular

phone, or when it may cause interference or

danger.

• Operation of any radio transmitting

equipment, including the Nokia 9000

Communicator, may interfere with the func-

tionality of inadequately protected medical

devices. Consult a physician or the manufac-

turer of the medical device if you have any

questions. Other electronic equipment may

also be subject to interference.

• As with other mobile radio transmitting

equipment, users are advised that for the

satisfactory operation of the equipment and

for the safety of personnel, it is recommended

that the equipment should only be used in the

normal operating position.

• Users are advised to switch off the phone

interface when at a refuelling point (service

station). Users are reminded of the need to

observe restrictions on the use of radio

equipment in fuel depots (fuel storage and

distribution areas), chemical plants or where

blasting operations are in progress.

• Do not store or carry flammable liquids, gases

or explosive materials in the same

compartment as the communicator, its parts

or accessories.

• Only qualified personnel should install or

service the communicator in a vehicle. Faulty

installation or service may be dangerous and

may invalidate any warranty which may apply

to the unit.

• Electronic fuel injection systems, electronic

anti-skid braking systems, electronic cruise

control systems and other electronic systems

can malfunction due to the lack of protection

from radio signals. Check regularly that all

cellular phone equipment in your vehicle is

mounted and operating properly.

• Remember to make backup copies of all

important data to protect against its possible

loss or alteration.

intro.frm Page 2 Wednesday, January 15, 1997 12:00 PM

Содержание 9000











































































































Результаты поиска

Содержание 9000

Отзывы:

Nokia 9000, Руководство пользователя, Страница: 8 / 106

Результаты поиска

Содержание 9000

Отзывы: