Nokia 9000 Скачать руководство пользователя страница 104

Страница: 104 / 106

15-4

14.Fax modem problems

When the communicator is used as a fax mo-

dem (see chapter 10 "System: Fax modem"),

use autobauding. The communicator and the

PC must be using the same baud rate. For the

communicator, this is set in System settings.

For the PC, the baud rate is set in the PC’s

connectivity software.

If a cable connection is used, fully compatible

operation with all PC fax and terminal soft-

ware cannot be guaranteed (consult with

your dealer). If you experience problems with

your PC fax software, use the infrared con-

nection.

If you experience problems establishing a

data connection with the remote modem, you

can try fixing the data transmission rate by

using an AT command, for example, ATS35 6,

which defines the remote modem as a V.32

modem. Common AT commands (based on

the ETSI 07.07 standard) supported by the

Nokia 9000 Communicator are listed in the

file

atcomm.txt

on the diskette supplied with

the product. For information on how to use

the AT commands, consult the documenta-

tion of the telecommunication or fax applica-

tion that you use on your PC.

15.Access code problems

The lock code is included in the communica-

tor sales package. If you forget or lose the

lock code, contact your communicator dealer.

If you forget or lose a PIN or PUK code, or you

have not received such a code, contact your

cellular service provider.

For information about Internet or terminal

passwords, contact the service provider.

16.Low on memory

If you notice that your communicator’s mem-

ory is getting low (see chapter 10 "System:

Memory") or you receive a warning note

about insufficient memory, you should delete

some documents. If you want to keep a copy

of the documents to be deleted, you can do

any of the following: print the document;

send it (as a fax, mail or short message);

transfer it onto a PC; make a backup of all

data in your communicator. See chapter 10

"System: File transfer" and “Backup/Restore.”

Especially downloaded pictures and received

faxes can take up significant amounts of

memory space.

17.Adjusting system time and date

This is done in the Clock application’s set-

tings. Clock can be found in the Extras appli-

cation group. See chapter 11 "Extras: Clock".

The date and time format can be selected in

the System settings (Preferences), see chapter

10 "System: System settings".

18.Distorted characters in Terminal

If the

data bits/stop bits/parity

settings are

different from those defined to the data serv-

ice by the operator, characters may look dis-

torted on the display.

19.Infrared connection

The communicator may be connected to a

computer, laptop or printer via an infrared

connection.

If you wish to use an infrared connection, the

computer to which you want to establish a

connection must have an IrDA compatible in-

frared port; installed and activated IrDA driv-

ers; and Microsoft Windows 95 (for more

information on IrDA drivers and their use in

Windows 95, contact Microsoft).

If the IrDA drivers are activated on your com-

puter, the computer will automatically detect

the presence of the communicator.

If you want use a printer which does not have

an infrared port, you may try to connect to

the printer via an IrDA adapter (not supplied

with the Nokia 9000 Communicator).

For further information see

readme.txt

file on

the diskette supplied with the communicator.

trouble.frm Page 4 Wednesday, January 15, 1997 2:21 PM

Содержание 9000











































































































Результаты поиска

Содержание 9000

Отзывы:

Nokia 9000, Руководство пользователя, Страница: 104 / 106

Результаты поиска

Содержание 9000

Отзывы: