Nokia 9000, Руководство пользователя, Страница: 31 / 106

Chapter 4 - Telephone 4-3
Managing calls
When you have made a call, information about
the call(s) is shown on the display within a frame
(see figure 4-2). In addition to the active call, you
can at the same time have a held call and a wait-
ing call. The conference call, which can contain
up to five remote participants, is handled as a
single call.
To switch between multiple calls, use the scroll
keys. The command buttons change according to
the selected call’s status.
Call information may include the following: the
name or phone number of the caller (if available),
call status (ACTIVE, ON HOLD, WAITING, AUDIO
OFF), call timer and call cost counter. The call
timer displays how much time has expired since
the beginning of the call. The timer also counts
time spent on hold (see figure 4-2). The call cost
counter shows the cumulative cost of the call, if
this network service is available and the call cost
setting is on. The call costs are calculated ac-
cording to the settings determined in the phone
interface (in currency or charging units). See
chapter 14 "Phone interface: Menus - Duration
and cost (Menu 6)".
To end a call, select the call you want to end and
press
End call
.
Making a new call
When you already have one active call, the
New
call
command is shown in the Telephone main
view. To make a new call, press
New call
and
make the new call normally.
If you already have an active and a held call, you
cannot make new calls before either dropping a
previous call or merging them into a conference
call.
Conference call
The conference call is a network service – con-
tact a local network operator to check if this
service is available. In a conference call, you and
up to five remote persons can hear each other si-
multaneously.
To create a conference call:
�
Make the first call normally.
�
Once this person has answered, make a call to
the second participant by pressing
New call .
�
Wait until the second person answers the call.
As the second person answers your call, the
command button changes to
Call commands .
Figure 4-2
teleph.frm Page 3 Wednesday, January 15, 1997 2:06 PM