manualshive.com logo in svg

Nokia 720C, Руководство по обслуживанию

Nokia 720C - мощный смартфон с множеством функций. Загрузите бесплатный сервисный мануал на manualshive.com для получения подробной информации о продукте. Находите инструкции по эксплуатации, техническому обслуживанию и ремонту, чтобы наслаждаться всеми возможностями этого устройства без проблем.

Поделиться
Скачать
background image

1.

Servicing precautions are printed on the cabinet,
and should be followed closely.

2.

Always unplug the unitÕs AC power cord from the
AC power source before attempting to: (a) remove
or reinstall any component or assembly, (b)
disconnect PCB plugs or connectors, (c) connect all
test components in parallel with an electrolytic
capacitor.

3.

Some components are raised above the printed
circuit board for safety. An insulation tube or tape
is sometimes used. The internal wiring is
sometimes clamped to prevent contact with
thermally hot components. Reinstall all such
elements to their original position.

4.  After servicing, always check that the screws,

components and wiring have been correctly
reinstalled. Make sure that the area around the
serviced part has not been damaged.

1.

Immediately before handling any semiconductor
components or assemblies, drain the electrostatic
charge from your body by touching a known earth
ground. Alternatively, wear a discharging wrist-
strap device. To avoid a shock hazard, be sure to
remove the wrist strap before applying power to
the monitor.

2.

After removing an ESD-equipped assembly, place it
on a conductive surface such as aluminum foil to
prevent accumulation of an electrostatic charge.

3.

Do not use freon-propelled chemicals. These can
generate electrical charges sufficient to damage
ESDs.

4.

Use only a grounded-tip soldering iron to solder or
desolder ESDs.

5.

Use only an anti-static solder removal device. Some
solder removal devices not classified as Òanti-staticÓ
can generate electrical charges sufficient to damage
ESDs.

5.

Check the insulation between the blades of the AC
plug and accessible conductive parts (examples:
metal panels, input terminals and earphone jacks).

6.

Insulation Checking Procedure: Disconnect the
power cord from the AC source and turn the power
switch ON. Connect an insulation resistance meter
(500 V) to the blades of the AC plug.

The insulation resistance between each blade of the
AC plug and accessible conductive parts (see
above) should be greater than 1 megohm.

7.

Never defeat any of the +B voltage interlocks. Do
not apply AC power to the unit (or any of its
assemblies) unless all solid-state heat sinks are
correctly installed.

8.

Always connect a test instrumentÕs ground lead to
the instrument chassis ground 

before

connecting the

positive lead; always remove the instrumentÕs
ground lead last.

6.

Do not remove a replacement ESD from its
protective package until you are ready to install it.
Most replacement ESDs are packaged with leads
that are electrically shorted together by conductive
foam, aluminum foil or other conductive materials.

7.

Immediately before removing the protective
material from the leads of a replacement ESD,
touch the protective material to the chassis or
circuit assembly into which the device will be
installed.

Caution:

Be sure no power is applied to the 
chassis or circuit and observe all 
other safety precautions.

8.

Minimize body motions when handling
unpackaged replacement ESDs. Motions such as
brushing clothes together, or lifting your foot from
a carpeted floor can generate enough static
electricity to damage an ESD.

9.

Indicates ESDs on the Schematic Diagram in

this manual.

1 Precautions

1-2 

                    720C/920C

1-3  Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated circuits and some field-
effect transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

1-2  Servicing Precautions

WARNING1: First read the “Safety Precautions” section of this manual. If unforeseen circumstances

create conflict between the servicing precautions and safety precautions, always
follow the safety precautions.

WARNING2: A high voltage VR replaced in the wrong direction may cause excessive X-ray

emissions.

WARNING3: An electrolytic capacitor installed with the wrong polarity might explode.

Содержание 720C
























































































Отзывы:

Нет отзывов

Похожие инструкции для 720C

NCR 5966 User Manual preview
5966
Бренд: NCR Страницы: 54
Ebird VLCD-5 Operation Manual preview
VLCD-5
Бренд: Ebird Страницы: 11
Garmin Forerunner 305 - Running GPS Receiver Quick Start preview
Forerunner 305 - Running GPS Receiver
Бренд: Garmin Страницы: 2
Rae MultiRAE Quick Start Manual preview
MultiRAE
Бренд: Rae Страницы: 4
Dahua Technology DHI-PHMIA135-AC User Manual preview
DHI-PHMIA135-AC
Бренд: Dahua Technology Страницы: 42
Samsung SyncMaster 240MP Instrucciones Para El Usuario preview
SyncMaster 240MP
Бренд: Samsung Страницы: 36
Alienware AW2518HF User Manual preview
AW2518HF
Бренд: Alienware Страницы: 57
Iiyama ProLite T2252MSC User Manual preview
ProLite T2252MSC
Бренд: Iiyama Страницы: 28
Advantech FPM-3100H Series User Manual preview
FPM-3100H Series
Бренд: Advantech Страницы: 46
Angelcare AC-CAM-210 Owner'S Manual preview
AC-CAM-210
Бренд: Angelcare Страницы: 8
ViewSonic VX922 - 19" LCD Monitor (French) Manual De L'Utilisateur preview
VX922 - 19" LCD Monitor
Бренд: ViewSonic Страницы: 23
Viotek GNV27DB2 User Manual preview
GNV27DB2
Бренд: Viotek Страницы: 20
Quick RDS 1562 Manual For Use And Installation preview
RDS 1562
Бренд: Quick Страницы: 36
Samsung S32A60 Series User Manual preview
S32A60 Series
Бренд: Samsung Страницы: 48
Emerson RXi User Manual preview
RXi
Бренд: Emerson Страницы: 69
Ingersoll-Rand QX Series User Manual preview
QX Series
Бренд: Ingersoll-Rand Страницы: 28
Summer BabyTouch 02000 Instruction Manual preview
BabyTouch 02000
Бренд: Summer Страницы: 2
Angelcare AC301 User Manual preview
AC301
Бренд: Angelcare Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды