5
Installation
Wall holder
Install the base station to a wall or some other suitable surface with the separate wall holder. See the
following dimensional drawing for the wall holder’s mounting hole distances. Use fastening accessories
suitable for the wall material, like plugs and screws. The screws need to have a countersunk head.
Installation location
Choose an installation location that it is central in relation to the radio transmitters.
The base station must be installed vertically. The base station is splash proof, but the location must be
chosen so that the unit will not be exposed to water or hot steam. Please note that the AC socket and
the power supply are not splash proof.
The location must have GSM/GPRS/3G network coverage. This can be verified before the final
installation steps by powering on the base station and checking the signal strength indicator LEDs.
Installation location must have one free AC socket for the power supply.
Connections
Every Cell-Sky-Link-RS485-3G base station model has one or two connectors in the lower part of the
enclosure. Every model has an M12 type female connector (receptacle) and a detachable male
