11
Config
MTR
Weak repeater filter
When checked, repeated data packet from repeater will not be save to buffer if received signal
level is weaker than already received. Default checked.
Config
MTR
Compatibility mode
When checked, the receiver uses an alternate signal processing algorithm. Try different setting
if you have problems with reception in low signal level conditions. Default checked.
Config
Sky
Network
0..255. The network address that must be the same for all devices on the same network.
Config
Sky
Effort
1..7, Custom.
Small value: Less power consumption, faster data rate, shorter radio range.
Large value: More power consumption, slower data rate, longer radio range.
Custom: Expert settings for frequency, bandwidth and spreading factor.
Config
Sky
Power
0..10 dBm. Output power range.
Config
Sky
Channel
1..7. Disabled if effort “custom” is selected.
Config
Sky
Enable Acknowledgement
Reserved for future use.
Config
Sky
Auth. key
Key for Message Integrity Check and data encryption.
Config
Sky
Enable beacon
Enable beacon for coverage mapping.
Config
Sky
Relay RX margin
Received signal margin can be stored in the buffer as its own channel. The reading should be a
positive value. If the reading is close to zero, the strength of the received signal is at the
reception limits.
Config
Sky
RX margin channel
Select channel for the received signal margin.
Config
Sky
Relay batt level
Battery level can be stored in the buffer as its own data channel. Utility data packet that
includes battery information is a separate data packet than the measuring data packet.
Therefore, it arrives at the receiver at a different time and less frequently.
