10
External battery
Config
External battery
If the external power supply is a battery, this can save power by connecting to the server only
from time to time.
Config
Buffering
Offline period
If external battery function is on. If offline period reaches this value, connect to the server to
empty the buffer.
Config
Buffering
Offline buffering
If external battery function is on. If the buffer reaches this value, connect to the server to empty
the buffer.
Ovanet settings
Config
Ovanet
Enable fault LED
If Ovanet is not used and there is no Ovanet radio module in slot 2, take selection off. It disables
the front panel error message LED.
Config
Ovanet
Network address
The network address that must be the same for all devices on the same network. 1…16777214.
Please note that all addresses are not valid. Addresses that contain 8-bit sequence 10101010 or
01010101 are not valid. If the display shows zero, it means that the value could not be read from
the radio module.
Config
Ovanet
Channel
The network channel that must also be the same for all devices on the same network. 1…28. If
the display shows zero, it means that the value could not be read from the radio module.
Config
Ovanet
Auth key
If encryption is used, enter an authentication key text that is the same on all network devices.
Otherwise, leave blank.
Config
Ovanet
Cipher key
If encryption is used, enter a cipher key text that is the same on all network devices. Otherwise,
leave blank.
Config
Ovanet
Diag interval
Advanced mode for the network analysis. Normal state is Off.
MTR & Nokeval Sky settings
Config
Module 1
Selects whether Nokeval Sky or MTR is in use at Module slot 1.
