Noblelift PS12/15CB-C, Инструкция по эксплуатации

Страница: 22 / 33

22
9. TROUBLE SHOOTING
IF THE TRUCK HAS MALFUNCTIONS FOLLOW THE INSTRUCTIONS THAT
MENTIONED IN CHAPTER 6.
Table 5: Trouble shooting
TROUBLE CAUSE REPAIR
Loads cannot be
lifted
Load weight is too high Load the truck within rated capacity.
Battery discharged
Charge the battery.
Lifting fuse faulty
Check and replace the lifting fuse.
Hydraulic oil level too low
Check and refill hydraulic oil.
Oil leakage
Check and repair the seal performance of
the oil hoses and/or cylinder.
Lifting stops at

1800mm
Fold the protective arms to the initial
position.
Lifting stops at

1800mm
Check the sensor on the protective arm.
1800mm height sensor failure Check the sensor on the mast.
Oil leakage from
air breathing
Excessive quantity of oil. Reduce oil quantity.
Stacker cannot
be operated
Battery is charging
Charge the battery completely and then
remove the main power plug form the
electrical socket.
Battery not connected Connect the battery correctly.
Fuse failure Check and eventually replace fuses.
Battery discharged Charge the battery.
Emergency switch is activated
Block the emergency switch function by
inserting and pulling the knob.
Tiller is in the operating zone Move the tiller firstly to the braking zone.
Protective arms are in the open
position, platform is folded upright Move the protective arms into the downside
position.
Foldable platform or protective arms in
one of the allowed positions Check the proximate switches on the arms
and platform.
Protective arms or folding platform is
not in the allowed positions Check the correct function of the arms
and/or platform.
Stacker only
travels in one
direction
The accelerator and the connectors are
damaged.
Check the accelerator and the connectors.
Stacker travels
The battery is discharged.
Check the battery status by the discharge
indicator.