Noblelift PS12/15CB-C, Инструкция по эксплуатации

Страница: 14 / 33

14
PLEASE FOLLOW THE WARNINGS AND SAFETY INSTRUCTIONS (CHAPTER 3) BEFORE
PERATING THIS STACKER.
MAKE SURE LOADS OR OTHER EQUIPMENT WILL NOT CAUSE POOR VISIBILITY BEFORE
OPERATING THIS STACKER.
Make sure that the load is placed horizontally and stably and the daily inspection is carried out. The
operator must carefully pull emergency button (13) out. Press horn button (20) to activate the horn.
a.
Parking
DO NOT PARK THE TRUCK ON INCLINED SURFACES.
The truck is equipped with an electromagnetic fail-safe stopping and parking brake.
Always lower the forks fully and park the truck in safe area. Press the emergency switch (13).
b.
Residual lift diagram
c.
Lifting
Travel with the fully lowered forks on the forks legs and press the lifting button (21) until you reach the
desired lifting height.
d.
Lowering
e.
Tilt of mast forward/backward
Fig. 8: Residual lift diagram
Fig. 9: Load facing uphill
The residual lift diagram indicates the maximum capacity Q [kg]
for a given load centre c [mm] and the corresponding lift height H
[mm] for the truck with horizontal load.
The white marks on the mast indicate the specific lifting limits
that can be reached.
For example, with a load centre of gravity distance c of 600 mm
and a maximum lift height H of 4500 mm, the maximum capacity
Q is 1000 kg.
If the forks are in the racking, firstly travel out of the
racking carefully with or without the pallet. By travelling
out of the racking, take care that the forks are not
touching the racking.
Press the lowering button (21) carefully.
Lower the load until the forks are clear of the pallet, then
drive the truck carefully out of the load.
Press tilt forward button (23), the mast will tilt forwards and
the pallet frame cannot be lifted.
Press tilt backward button (24), the mast will tilt backwards.
DO NOT OVERLOAD THE TRUCK! MAXIMUM CAPACITY
IS 1200KG FOR PS12CB-C AND 1500KG FOR PS15CB-C.
LIFT ONLY THE CAPACITY ALLOWED ACCORDING TO
THE RESIDUAL LIFT DIAGRAM.