Use and Maintenance Manual model “H17 V LIGHT”
24
ENGLISH
10 FIRST START-UP INSTRUCTIONS
This chapter highlights a series of operations to carry
out during the first start-up phase of the appliance.
10.1 HOUR-DATE SETTINGS
The procedure follows to set the date and time, use-
ful for the thermostat with timer function, on the mod-
els of the manufacturer's range.
OPERATING PROCEDURE:
MENU >> USER >> SETTINGS >> HOUR - DATE
Access the menu by pressing
Scroll the entries to USER with
Access the menu by pressing
Scroll the entries to SETTINGS with
Access the menu by pressing
Scroll the entries to HOUR-DATE, using
Once you reach the HOUR-DATE menu item, press
The screen appears to adjust the time and calendar
as in the figure below.
OK
OK
OK
OK
Edit the highlighted data using the keys
Confirm the data changed by pressing
Repeat the operation to complete the settings.
While editing, remember the following:
• to return to the previous data without saving
the last data changed, press
•
if you are going to change one single datum, once
the change has been made, press repeatedly to
exit the function described in the paragraph.
To go back to the STAND-BY screen, press
repeatedly.
OK
OK
10.2 PROBE ADJUSTMENTS
The following procedure explains how to calibrate all
probes, should the value differ from the values shown
on a reference standard thermostat.
OPERATING PROCEDURE:
MENU >> USER >> SETTINGS >> PROBE ADJUSTMENTS
Access user menu by pressing
Scroll down entries to select SETTINGS using
Access the menu by pressing
OK
OK
By pressing , scroll down entries to select SETTINGS
Access the menu by pressing
Scroll down entries to select PROBE ADJUSTMENTS
Press to access PROBE ADJUSTMENTS
The probe adjustments screen will appear as in the
figure below.
OK
OK
Adjust the highlighted value by pressing
Example: the reference thermostat displays 21°C,
while the controller displays 19°C.
Set +2 to display 21°C on the controller.
Confirm your change by pressing
To go back to the STAND-BY screen, press button
repeatedly.
OK
10.4 FIREPLACE POWER SETTINGS
Fireplace power defines the quantity of heat pro
-
duced by the appliance. This entails a difference in
fuel consumption. Basically, it is used to speed up the
useful time to reach the desired room temperature in
the premises where the product is installed.
From the STAND-BY screen, key to select the
desired power;
Values vary from 1 to 7;
Edit values with keys
Confirm the new settings with the key
or wait 3
seconds for auto-confirm.
OK
10.3 ROOM TEMPERATURE SETTINGS
The ambient temperature defines the temperature
you want to obtain in the premises where the prod-
uct is installed.
From the STAND-BY screen, key to select the
value;
The values vary from 7°C to MAN (with the MAN val-
ue it is intended that, once set, the appliance NEVER
goes to power save).
Edit the value with the keys
Confirm the new setting with the key
or wait 3
seconds for auto-confirm.
OK
