Use and Maintenance Manual model “H17 V LIGHT”
38
ENGLISH
19 CLEANING THE APPLIANCE
Before carrying out any cleaning operation on the ap-
pliance, take the following precautions:
•
switch off the product and in “OFF” status
disconnect the power supply cable;
•
ensure all the parts are cold to touch;
•
ensure the combustion ash is
completely out.
To clean the surfaces, on the painted metal parts,
use a cloth soaked in water and soap.
Use of abrasive detergents or diluents causes
damage to the surface of the product.
Please carefully adhere to the following
instructions for correct cleaning of the appliance.
Non-compliance could cause its
malfunctioning.
Product installation must take place in in such a
way as to ensure easy access to the appliance
itself and to the flue for cleaning and maintenance
operations.
Lift the lever (supplied with the product) to unlock
and open the door as illustrated in the figure below:
To extract the flame trap, lift it slightly as in the figure
below:
Remove it by pulling the lever towards you with a
slight movement downwards, as shown in the figure
below:
19.1 CLEANING THE FIREPLACE
Open the fire door using its specific tool and:
•
vacuum the slide bringing the ash to the brazier;
• disassemble the flame trap, vacuum the compart
-
ment hidden by the flame trap (paying utmost at
-
tention not to damage the sensor placed behind the
flame trap).
OPERATING PROCEDURE:
Open the fire door using the specific lever supplied
with the product as illustrated in the figure below:
Insert the lever (supplied with the product) in its
specific slot, as illustrated in the figure below:
