Nobili BNE 100, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 46

AGRICULTURAL MACHINERY MANUFACTURERS
12
04.09.2009
RECOMMENDATIONS FOR USE
ALWAYS STOP THE TRACTOR ENGINE BEFORE CARRYING OUT ANY WORK OF
ADJUSTMENT OR CLEANING ON THE MACHINE.
BEFORE STARTING THE ADVANCING OF THE MACHINE, WAIT THAT THE ROTOR REACHES THE R.P.M.
WORK ONLY ON STRAIGHT LINE, LIFT THE MACHINE FROM THE GROUND BEFORE CHANGING
DIRECTION.
DO NOT ACTIVATE THE SIDE DISPLACEMENT WITHOUT LIFTING THE MACHINE.
IF DURING THE LIFTING FROM THE GROUND, THE JOINTS OF THE PROPELLER SHAFT ARE BENT TO
MORE THAN 40
°
(STILL P.T.O.) REMOVE THE SHAFT OF THE TRACTOR P.T.O.
DURING WORK, BLADES OR RAMS SHOULD NOT TOUCH THE GROUND.
DAILY CHECK THE WEAR OF BLADES OR RAMS.
IN CASE OF IRREGULAR CONSUMPTIONS OR BREAKS, IMMEDIATELY SUBSTITUTE THE DAMAGED
PARTS. USE ONLY ORIGINAL SPARE PARTS.
AFTER THE FIRST HOURS OF WORK (3 HOURS) CHECK THE TENSION OF THE BELTS, DAILY CONTROL
THE TIGHTENING OF ALL NUTS AND BOLTS AND THE TENSION OF THE BELTS.
VERIFY SPECIALLY THE TIGHTENING OF BLADE BOLTS (See page 13).
CHECK THAT THE SAFETY CHAINS OF PINS AND THE ANTIROTATION CHAINS OF THE PROPELLER
SHAFT GUARDS ARE INTACT AND COUPLED UP.
CLEAN, WASH, GREASE THE INSIDE AND OUTSIDE OF THE MACHINE AT REGULAR INTERVALS.
SPECIALLY REMOVE THE MATERIAL SETTLED ON THE ROTOR AND BLADE SUPPORTS.
BEFORE A LONG PERIOD OF INACTIVITY THE MACHINE SHOULD BE CLEANED AND GREASED. PUT
IN A PLACE PROTECTED FROM BAD WEATHER.
THE USER IS COMPLETELY RESPONSIBLE OF ROAD-TRANSPORT. HE MUST CHECK THE COMPLIANCE
WITH THE HIGHWAY CODE IN FORCE IN HIS COUNTRY.
IF A TRACTOR WITHOUT SOUNDPROOF AND PRESSURIZED CABIN IS USED, IT IS NECESSARY THAT
THE OPERATOR USES INDIVIDUAL PROTECTION SYSTEMS:
1) PROTECTION EARPIECES FOR NOISE, IF STANDARD EXPOSURE LEVELS ARE
EXCEEDED.
2) DUST MASK, IF A GREAT QUANTITY OF DUST IS RAISED BECAUSE OF EITHER THE
KIND OF PRODUCT WORKED OR VERY DRY GROUND OR USE OF OPEN MACHINE.
IF DURING WORK YOU NOTICE UNUSUAL VIBRATIONS OF THE MACHINE, STOP IMMEDIATELY AND
CHECK THE INTEGRITY OF ROTOR AND BLADES OR RAMS.
EXCESSIVE VIBRATIONS CAN CAUSE PHYSICAL DAMAGES TO THE DRIVER.
THE MANUFACTURER DISCLAIMS ALL RESPONSIBILITY IN CASE OF DAMAGES OR ACCIDENTS
CAUSED BY AN INAPPROPRIATE USE OR NON-OBSERVANCE OF RECOMMENDATIONS INCLUDED IN
THE USE AND MAINTENANCE MANUAL.