AGRICULTURAL MACHINERY MANUFACTURERS
19
04.09.2009
PARKING POSITION
DISCONNECT TRACTOR P.T.O.
TURN OFF TRACTOR ENGINE WHEN THE MACHINE
IS RAISED FROM THE GROUND.
TAKE THE KEY OFF THE DASHBOARD.
MAKE SURE ALL MOVING PARTS ARE IDLE.
CHOOSE A STABLE, FLAT GROUND TO PERFORM THE FOLLOWING OPERATIONS
Lower foot (
P
).
Lower the elevator until the machine rests on the ground.
Disconnect propeller shaft from tractor P.T.O. and secure it to the suitable hook (
G
), so as to avoid damaging the
guard.
Extract pins and move away the tractor.
Make sure the machine is slightly tilted forward so as to prevent backwater on flat parts when the machine is
parked in the open.
INTERVENTIONS AT THE END OF SEASON
Before garaging the machine in a dry and protected place, some maintenance operations should be
carried out:
1) Remove the Cardan shaft and carry out the maintenance separately (see Instruction handbook of the Cardan
joint).
2) Wash carefully the machine, in particular inner parts, being sure to have removed completely every rests of
earth or grass. Check the protections of the rotor and roller bearings.
3) Grease the rotor bearings, rotating the rotor manually, until the exceeding grease comes out from the inner
part of the bearing supports cleaning inside.
4) Disassemble the roller supports, cleaning and greasing the bearings and spacers and checking that the
bearing protections are intact.
5) Put a grease film on all parts where the paint or galvanization has been removed.
6) Remove the protection guard of the belts and clean inside.
7) Disassemble and check the knives and blades and their fastening elements.
8) Check the integrity of the protection straps and pin safety laces.
LOCK THE PIN WITH THE SUITABLE SAFETY PINS
REPLACE LOCKS IF DAMAGED.
P
G
BNE 8
S
Содержание BNE 100
Страница 1: ...Shredder type BNE 04 09 2009...
Страница 29: ...Trince Broyeur Shredder Mulchger t BNE BNE S 27 03 2003...
