Nobili BNE 100, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 46

AGRICULTURAL MACHINERY MANUFACTURERS
15
04.09.2009
45
°
BNE 7
COUPLING TO THE TRACTOR
THE MACHINE HAS BEEN DESIGNED FOR COUPLING TO THE TRACTOR PROVIDED
WITH REAR ELEVATOR.
WARNING: IN THE THREE-POINT HITCH AREA YOU MAY RUN THE RISK OF HARMING
YOURSELF.
WARNING: GET OUT OF THE THREE-POINT HITCH AREA WHILE THE ELEVATOR IS
RUNNING!
P
B
SECURE ALL PINS WITH SAFETY PINS
REPLACE LOCKS IF DAMAGED
BNE 8
BNE 9
S
S
Machines type BNE 150 - 180 - 210 are provided
with two different hitch positions; select between
the central position and the lateral one.
See page 18.
Before coupling the machine to the tractor, make
sure the drawbar is in the required position.
Check the elevator links are at the same height
from the ground, and fit them into the connecting
pins (
D ).
Fit safety pins ( S ).
Connect the 3rd point tie rod ( P ) to the connecting
rod ( B ) by the proper pin; adjust the length of the
3rd point tie rod so as to make the connecting rod
(
B ) reach a 45
°
angle when the machine is in the
working position.
If you run the machine without
connecting rod, or with connecting rod
blocked, the warranty will be voided,
as the roller or wheel supports could
have been damaged irreparably by
such operations.
Get up the machine from the ground and adjust cutting height (please see: working height adjustment on
page 17).
Raise foot and secure it.
Adjust machine and elevator attitude by placing the machine horizontally or slightly higher on the rear side so as
to make material infeed easier.
D
S