background image

 

 

1

1.0  INTRODUCTION 

 

This service manual covers adjustment, disassembly, operation, preventative 
maintenance, troubleshooting procedures and contains an illustrated parts list 
for the GBC Shredmaster 5160x shredder. The GBC Shredmaster 5160x is a 
cross-cut, console shredder designed for higher volume requirements. 

 

*Begining mid year 1997, the 5160x will be renamed as the 6160x.  The 6160x is identical 
to the 5160x with the exception of a new top cover label.

   

 

Innovative engineering has provided this shredder with the following operating 
and safety features:

 

 

1

.  

Automatic Operation 

- The unit begins to operate when a light beam is 

broken as paper is inserted into the shredder throat. The motor stops running 
when the light beam is no longer broken and the paper has had an 
opportunity to clear the cutting head.

 

 

2

.  

Overload Warning 

- Whenever the capacity of the shredder is exceeded the 

unit stops shredding and the “Reverse” symbol illuminates. 

 

 

3

.  

Thermal Protection 

- The motor is equipped with a thermal protection device 

which is triggered if the motor temperature reaches a predetermined level. 
The motor will not operate until it cools.

 

 

4

.  

Bag Full Sensor

 - When the shred bag becomes full, the motor automatically 

turns off and the “Bag” light symbol illuminates. The shredder will not operate 
until the shredded material is either compressed down or emptied.

 

 

5

.  

Door Ajar Sensor

  - When the door of the shredder is not fully closed, the 

“Door”  light symbol illuminates. This is a safety feature that will only allow 
the shredder to operate when the cabinet door is in the closed position.

 

 

Before using your GBC Shredmaster shredder, carefully read the operating 
instructions in this manual.  Once you have gained experience and familiarity 
with its operation, you will be better equipped to use the remaining sections of 
this manual to troubleshoot and repair the shredder.

 

 
 
 
 
 
 

 
 

Содержание Shredmaster 5160X

Страница 1: ...Whenever the capacity of the shredder is exceeded the unit stops shredding and the Reverse symbol illuminates 3 Thermal Protection The motor is equipped with a thermal protection device which is triggered if the motor temperature reaches a predetermined level The motor will not operate until it cools 4 Bag Full Sensor When the shred bag becomes full the motor automatically turns off and the Bag li...

Страница 2: ...tinuous Duty Power Consumption 1000 05 Watts 17 Sheets Nominal Line Dimensions 38 50 High 24 00 Wide 22 00 Deep Weight 245 Pounds Shredding Speed 26 5ft min 1 sheet 18 5ft min 18 sheets Shred Size 3 16 x 2 3 8 4mm x 60mm Feed Throat Width 16 Shredder Capacity 18 22 sheets of 8 5 x 11 20 Bond Paper Noise Level 67 5 No Load 81 0 Full Load Bag Size 48 H 24 W 18 D Shipping Box Dimensions L x W x H Hea...

Страница 3: ...ay face toward the front or back of the cabinet 2 Open the door by pressing on the door knob and place the hand grips a located in the cabinet base b figure 2 into the holes found in the cabinet 3 Insert a plastic bag into the bag frame from the under side of the rail fold over all four sides and slide back into the guide rails 4 Connect the power cord to a single phase socket rated at 15 amps Fig...

Страница 4: ... the shredder bag must be changed 3 For safety concerns the machine will not operate when the cabinet door is open The red control symbol d will light 4 Whenever the shred capacity has been exceeded the unit will stop shredding The reverse symbol R e will light Press the rocker switch a into position R and reduce the paper stack and begin shredding again In the case of a severe jam it may be neces...

Отзывы: