Nlynx ETU400 Скачать руководство пользователя

Страница: 34 / 314

ETU400 User Guide 011603

2-9

The ETU Compatibility Diskette: For Non-ES32 Emulation Products

When ETU was originally sold, there was a compatibility disk that shipped

with the product to allow

DOS

products to run with it. Very few PC run in

DOS mode anymore, so that is no longer included with this product,

however it is available on our website at http://www.nlynx.com/html/tb-

etu36.htm. To use this program, called IBMTRAN, you would install it on

the IBM PC from which you run ETU. Each time you run ETU, you would load

IBMTRAN into the PC's memory.

Who Could Use IBMTRAN?

You may need to use IBMTRAN if your emulation software is

not

one of the

following Andrew products: 3XTwin, 3XPlus, 3XPlus-X.25, 3XMate, 3XTwin-

Laptop, 3XMate-Laptop, Multi-Twin, or MacTwin. Additionally products in

the NLynx Systems ES/95 family do not need it, and products in the NLynx

Technologies ES32 family do not need it.

NOTE:

IBMTRAN runs only under DOS and isn't intended for use with

Windows, OS/2, UNIX, or the Apple Mac.

Some emulation products, such as protocol converters, have their own ETU

interface programs. If your emulation package includes a program

specified as an interface to ETU, you should use that program instead of

IBMTRAN.EXE.

If you attempt an ETU file transfer and you receive one of the following

messages, you may need to use IBMTRAN:

Device not a PC or emulator loaded incorrectly.

Attached workstation is not a PC.

Copying IBMTRAN To Your Hard Drive

If you decide you need the compatibility program, copy it from the

ETU Compatibility diskette (enclosed with ETU) to the hard disk

subdirectory (or, if applicable, to the floppy diskette) that contains

the emulation programs.

On your PC, make the directory with your emulation programs the

current directory.

Insert the IBMTRAN diskette in the diskette drive, and copy it to the

hard drive.

If your floppy drive is a:, enter:

copy a:*.*

Some emulation programs have a separate Application Program Interface

(API) program. If your emulator is in this category, make sure that API

is running after you load your emulation program and before you run ETU,

or it will not be compatible with ETU.

If your emulation program is running, and IBMTRAN displays the message

Содержание ETU400



























































































































































































































































































































Результаты поиска

Содержание ETU400

Отзывы:

Похожие инструкции для ETU400

Бренды по названию

Популярные бренды

Nlynx ETU400, Руководство пользователя

Результаты поиска

Содержание ETU400

Отзывы:

Похожие инструкции для ETU400

Бренды по названию

Популярные бренды