Nlynx ETU400 Скачать руководство пользователя

Страница: 2 / 314

ETU400 User Guide 011603

SOFTWARE LICENSE AGREEMENT

NOTICE

=======

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE

OPENING THIS PACKAGE. OPENING THIS PACKAGE INDICATES YOUR ACCEPTANCE OF

THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD

PROMPTLY RETURN THE PACKAGE UNOPENED, AND YOUR MONEY WILL BE RETURNED.

NLynx provides the computer software program contained on the medium in

the package (The "Software") and licenses its use. You assume

responsibility for the selection of the Software to achieve your intended

results, and for the installation, use and results obtained from the

Software.

DEFINITIONS

============

The following definitions apply to the terms as they appear in this

Agreement:

* "NLynx" means NLynx Technologies, Inc. acting by and through one or

more of its subsidiaries in its Network Systems group.

* "You" and "Your" refer to any person or entity that acquires or uses

this Package.

* "Software" means the computer programs contained in this Package,

together with all codes, techniques, software tools, formats, designs,

concepts, methods, and ideas associated with the program.

* "Package" means the Software, hardware, manual(s), and other items

accompanying this Agreement.

PERMITTED AND INTENDED USES

============================

NLynx grants You a non-exclusive license to use the Software in this

Package according to the terms set forth below. You may:

* Operate the Software on one computer at a time, unless the Installation

Manual specifies that this Software may be used on a greater number of

computers.

* Make one backup copy of the Software, which automatically becomes the

property of NLynx and is subject to this Agreement.

* Transfer the Software to a single hard disk drive or other permanent

storage device for Your own use and keep the original Software as a

second backup copy.

* Make such other use of the Software as is specifically permitted by the

Installation Manual relating to the Software.

Содержание ETU400



























































































































































































































































































































Результаты поиска

Содержание ETU400

Отзывы:

Похожие инструкции для ETU400

Бренды по названию

Популярные бренды

Nlynx ETU400, Руководство пользователя

Результаты поиска

Содержание ETU400

Отзывы:

Похожие инструкции для ETU400

Бренды по названию

Популярные бренды