Nlynx ETU400, Руководство пользователя

Страница: 109 / 314

ETU400 User Guide 011603
9-5
Using PWRTO3XB
In order to send files from multiple micros to the same host library
using PWRTO3XB with the TOFILE(*MULTI) option, you must rename any files
sent in a first transfer before performing a second transfer.
This procedure is necessary because when files are transferred from
multiple micros to a single micro, the resulting file names on the
destination micro are the device names from which the data was
transferred. For example, a file sent from Device 1 will end up on the
receiving micro as a file named device1. A file sent from Device 2 will
be nameddevice2.
Because of this naming convention, any files sent in a second file
transfer (from the same-named micros to the same host library) will end
up with exactly the same names as the files sent in the first transfer
(device 1, device 2, etc.). As a result, the files sent in the second
transfer will overwrite the data sent in the first transfer.
In addition, with PWRTO3XB you may also use the option to delete the
micro file after transfer to the host, in which case, after a second
transfer the data from the first transfer will no longer exist on either
the micro or the host.
There are two ways to avoid copying over files in the second transfer:
You must either use the host function to rename the first files sent to
the host, or specify the option ADDRPL (*ADD). Note that ADDRPL (*ADD)
combines data from multiple micro files in a single data file on the
host.