Nlynx ETU400, Руководство пользователя

Страница: 262 / 314

ETU400 User Guide 011603
E-24
PROBLEM
“ SYS1301 Invalid Procedure Name ” when running a System 36 OCL. Commands sent in the script
work when sent from a command line. OCL is started from a batch file.
CAUSE:
When you execute the OCL procedure, ETU looks for a PC with ETU support, but instead it sees
the System36 as the one that started the procedure and denies further action, causing your OCL to
error out.
SOLUTION:
You can not start the OCL script from a batch file; it must be started interactively.
PROBLEM:
I can't transfer a file to the host from my Mac. I get an error message: “ DOS error code 0C general
failure probable error media error ”. Transfer is run from an OCL script that asks for a filename.
CAUSE:
ETU asks for a "Qualified file name", such as 'C:\PCPRINT.LST'. The filename needs to include
the full path including the drive specification.
They are only typing in the filename.
Could be caused by using an incorrect path name in a script.
Could be caused by not reading the A: drive.
SOLUTION:
Put an * in the qualified filename field and it will prompt the end user to look for the file. The name
of the hard drive must be included in the path, and it is all case-sensitive.
PROBLEM:
I can do a transfer, but when I try to do the same command in a batch procedure, it fails. When ETU
is beginning the transfer... it generates these error messages:
ETU transfer failed (see Job Log and ETU Audit Report) since
all FROM or TO devices failed .
Devices in error are xxxxxxxx.
CAUSE:
The device name or REQUESTER that you used for the “ Xfer from which micro?” parameter is
incorrect. Device not found during acquire of program device xxxxxx to file PWRWS library
ETUNEW.
SOLUTION:
The name of your device can be seen under the Menu – WSMENUS in the upper left. If you use F9
to replay the command the parameter to fix is MICLST .
The device that you are going to use for the *REQUESTOR must be connected and at the signon
screen.