Nivus OCM F, Инструкция по эксплуатации

Страница: 41 / 110

Parameter Setting
OCM F - rev. 05 / 06.04.2018 page 41
Regard the measuring units
Please observe the bottom line of the display whilst programming, indicating the pre-
selected measuring unit.
After mounting and installing sensor and transmitter (see previous chapters) activate the
power supply.
On initial start-up the operating language needs to be selected:
Fig. 20-2 Language options for initial start-up
Use >up< and >down< arrow keys to choose the desired language and confirm with >Enter<.
The language can be changed later at any time by using the >EXTRA< / >Language< menu.
On start-up the screen below comes up:
1
Device version (see chapter “11.1 Device Types”)
2
Device software version no.
3
Device software version date
Fig. 20-3 Start screen
This screen will remain for a couple of seconds before the main display appears.
Fig. 20-4 Main display

Press >ENTER< in order to get to the secondary screen of the main display.
Fig. 20-5 Secondary screen of the main display

The display will return to the previous screen either if pressing >ENTER< again or ap-
prox. 30 seconds after the last key action.