Nivus OCM F, Инструкция по эксплуатации

Страница: 28 / 110

Instruction Manual
OCM F
page 28 OCM F - rev. 05 / 06.04.2018
14.6 Power supply of OCM F
Depending on the type of OCM F used, it can be supplied with 100…240 V AC or with
24 V DC (see chapter “10 Specifications”). The two slide switches (located above the termi-
nals) serve as additional power switches.
Fig. 14-12 Slide switch position in terminal clamp housing
Operation with AC voltage / DC voltage
A DC unit can be operated exclusively with 24 V (±15 %) DC voltage.
An AC unit can be operated exclusively with 100…240 V (+10 % / -15 %) AC voltage.
When operated with alternating current, the direct current supply clamps 4 and 5 both provide
a voltage of 24 V and max. capacity of 100 mA (turn on 24 V switch).
Please note, when using this supply voltage (e. g. for digital inputs with control signals), it
must not be looped through the complete switchgear in order to keep disturbing interferences
as low as possible.
Fig. 14-13 AC model power supply
Fig. 14-14 DC model power supply