Nitta NITTAOMEGA L, Инструкция по эксплуатации

Страница: 5 / 53

Safety Precautions
II
Safety Precautions
For Safe Use of the Product
a) Hazard, warning and cautions indications in this document
This section describes safety precautions for proper use of the Nitta product and prevention of
injuries and property damages. These precautions are classified into three levels according to
severity of potential hazards and damages that may be caused by non-conformity thereto.
Indications in this document
Improper use disregarding this indication may lead to a hazardous situation
which may result in death or serious injury and requires urgent alerting when
such hazard is materialized.
Improper use disregarding this indication may lead to a hazardous situation
which may result in death or serious injury.
Improper use disregarding this indication may lead to a hazardous situation
which may result in minor injury or property damage.
This indicates use examples, etc.
This indicates special instructions less important than cautions.
Please note that a severe accident may occur depending on situations even when instructions in the
indications are observed. Please strictly observe the instructions.
(1) We assume no responsibilities for any damage arising out of any failure
caused by intention or negligence of customer (including software
malfunction), or any reason not attributable to Nitta, such as an accident or
natural disaster.
(2) We assume no responsibilities for any damage caused by any use not
described or prescribed in our catalogs (including the instruction manual).
(3) We assume no responsibilities for any failure alleged to be warrantable by
customers if there is no clear evidence of our responsibility.
(4) We assume no responsibilities for any incidental damage arising out of use of
or inability to use our product (including but not limited to loss of business
profit and business interruption).
b) Introduction
ATC does not work alone and is only usable when being equipped on a robot and a compatible unit.
For increased safety of the entire system, it is necessary to consider not only the single ATC but
also the robot system and compatible unit system as a whole.
For use of ATC, be sure to observe safety instructions concerning core robots and
compatible units. For any work within the robot safety fence, consider preparing
a safety system design to shut down power over 50V once any person gets into
the fenced area.
DANGER
WARNING
CAUTION
DANGER
Disclaimer