Group On/off Setting
In testing or changing the flash effect of different slave units group,
you can turn on or off any group.
1. Press the Group Selection button on Nissin MG80 Pro.
While the selected group is blinking in the display, press the “Group On/Off ” button.
When the group is switched on, the exposure setting value and exposure bar
will be appeared on the right side of the group. When the group is switched off, only "---" is shown.
2. Press the “Group Selection” button when finish setting.
Nissin MG80 Pro Commander Mode
For example
：
A & C: on, B & D: off
A & C: off, B & D: on
17
