Group Setting
1. Power on Nissin Di700A and switch to wireless slave mode,
press “Set ” several times until the (Group mode in the display),
then turn the to change the group number.
2. Press the key to confirm the new setting.
MG80 Pro, provides individual control of 4 groups (strobes), you can set
these 4 groups in different settings. Before shooting, you have to set
each strobes to be one of these 4 groups.
Set
A
B
C
/ /
Set
A
B
C
/ /
1. Use Mode Dial to change group .
1. Use Mode Dial to change group .
A
B
C
/ /
Nissin Di700A Flash
Nissin i60A Flash
Nissin MG10 Flash
Nissin Air R Receiver
1. Use Mode Dial to change group .
Nissin MG80 Pro Slave Mode
1. Press the Group Selection button to change
Hold the 1 second to change group
16
