The NAS system is using an independent identity (ID) function to access
strobes, the NAS strobes will not be affected by other commanders
whenever they are using the same channel in the same location. A slave
unit of Nissin flash or Nissin receiver can only be controlled by one and
only one NAS commander with pairing in default setting.
MG80 Pro offers “Open Mode” ,a new function (only works with MG Series),
on the pairing setting. Open Mode can let two or more camera using same
set MG10 in one place.
Open Mode (only works with MG Series)
1. Hold the button of Nissin MG80 Pro for 1 seconds,
lights up on lower left corner means Open Mode is on.
Now hold the for 1 seconds again to turn off.
Open Mode Setting
14
