Wireless Flash Shooting
NAS
Step 2: Pairing on Nissin MG80 Pro in Commander Mode
1. Press the on/ off switch to power on and press the Power button 3 seconds to
select Commander Mode.
2. Turn off the MG80, hold the Panel Lock key and the “On & Off” button at the
same time for 3 seconds. The Pilot LED will blink about 10 seconds to process
the pairing.
NOTE
If strobes still "beep" constantly after the pairing process, is means the pairing
process is not complete. Please move your MG80 Pro towards the Beeping strobes,
then turn off the MG80 Pro and re-do the pairing process by holding Panel Lock key
and the “On/Off” button again for 3 seconds.
(*) Compatible Channel for NAS System
i60A / Di700A / Air R
MG10 / MG8 / MG80 Pro
Ch.2 - 8
Ch.1 - 8
Ch.1 - 8
Ch.2 - 8
Ch.1 - 8
Ch.2 - 8
Air1
Air 10s
MG80 Pro
13
