On-Camera Mode
Manual Exposure Flash
In some occasions, or for special expression, you may need your own flash
exposure instead of the automatic controlled exposure. You can set MG80 for
non-automatic flash mode, and select the desired flash power.
Set MG80 to the camera’s hotshoe and press the on/ off switch to power on.
Press the Power button 3 seconds to select On-Camera Mode.
Press the button to “M” mode.
You can select the power by rotating the Control Wheel :
1/256 – 1/1 (Full) power.
Red color bar represent 1 step, White color bar represent 1/3 step
10
