manualshive.com logo in svg

Nissei NA3338WEGK, Руководство оператора, Страница: 25 / 65

Поделиться
Скачать
Nissei NA3338WEGK Скачать руководство пользователя страница 25

Version date: March 27

th

 2018

25

5

Operator Manual

NA 3338 Rapid Combi APM

5.8  Changing the settings

5.8.1 Adjusting the viscosity

Use this function only during ‘Run’.

The viscosity can be adjusted in half increments. On the display this is shown 

with a . (dot) after the last digit. For example, 1.6. is half more than 1.6

1. Press

 ‘-’ and ‘+’ to-

gether until the dis-

play flashes. The 

display on the right 

now shows the set 

value.

2. Press

 ‘+’ or ‘-’ to in-

crease or decrease the 

viscosity.

3. Wait

 approximately 5 

seconds. The display 

on the right now 

shows the new set 

value.

5.8.2 Adjusting milkshake thickness

The amount of water in the milkshake can be adjusted with the water control 

valve on the front of the syrup block.

Thinner milkshake:

•

Turn

 the water con-

trol value to the left.

Thicker milkshake:

•

Turn

 the water con-

trol valve to the right.

5 sec

Содержание NA3338WEGK


































































Отзывы:

Нет отзывов