3
Version date: March 27
th
2018
12
Operator Manual
NA 3338 Rapid Combi APM
3.4 Connection of cooling water
This paragraph only aplies to water-cooled machines.
• Connect the supply hose to a washing machine tap (3/4’’ water tap with
ventilation). The water pressure must be a minimum of 1 bar and a maximum
of 3 bar.
• Connect the discharge hose to the discharge pipe.
When connecting, please observe the local water board
connection conditions.
The machine has a check valve. This valve along with aerated
faucet prevents the backflow of water into the water supply.
When setting up or moving the machine, make sure that the
water supply and discharge hoses cannot bend or otherwise
become blocked.
Make sure that no water can enter the machine. If water comes
into contact with electrical parts, this can cause damage and/or
danger.
3.5 Adjusting castors
The castors under the machine can be adjusted in height.
Make sure that the machine does not topple over when adjusting
the castors.
1. Tighten
all castors as far as possible.
2.
Now
adjust
the castors so that the machine leans slightly forward
(this allows rinsing and washing water to flow to the draining aperture at the
front of the machine).
Do not unscrew the castors by more than 5 to 8 mm.
3. Place
the front castors on the brake.
Make sure that the brake of the two front castors is secured after
adjusting.