Nissei NA3338WEGK Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 65

Nissei NA3338WEGK Скачать руководство пользователя страница 24

5

Version date: March 27

th

2018

24

Operator Manual

NA 3338 Rapid Combi APM

5.7 Dry fill (optional)

To fill or top up the machine with ice cream mix using ice cream powder:

1. Remove

the lid from the mix tank.

2. Press

’D.F.’ for 3 seconds.



A set amount of water now flows into the mix tank.

3. Wait

until the agitator rotates more quickly.

4. Add

the powder steadily in a controlled manner.

5. Replace

the lid on the mix tank.

In the off’-mode and ‘wash’-mode the dry fill button act as a
start/stop button of the water tap.

Add the powder steadily to prevent lumps from forming.



Wait at least 5 minutes before dispensing ice cream.



5.7.1 Start up a empty machine with Dry fill

To start up an empty machine:

1. Prepare

enough (at least 4 bags) ice cream mix in a clean, disinfected

bucket.

2. Start

up the machine with the prepared mix according to paragraph 7.3.15

«
...
22
23
24
25
26
...
»

Содержание NA3338WEGK


































































Отзывы:

Нет отзывов