Nilox 17NXGCON38001, Руководство пользователя

Страница: 27 / 57

UPS start
Start in normal mode

Connect the UPS to the wall outlet (make sure the outlet is grounded). The UPS will immediately start running
a preliminary self-diagnostics test that lasts several seconds. All LED will initially be on to indicate that power
is on and that ByPass is correctly operating. At the end of pre-start, the UPS is in ByPass mode and able, if
necessary, to charge batteries.

Press and hold down the ON [ ] button for about 3 seconds until the unit beeps twice. If the UPS start
procedure was successfully completed, the LCD will display that shown in the following illustration.
UPS
V
LOAD INPUT
The UPS is now operating correctly. The batteries should be charged for at least 4 hours before simulating a
blackout.

(OPTIONAL: Blackout Simulation) Disconnect the power cord to simulate a blackout. The indicator [ ]
will immediately turn off and the amber colored indicator [ ] will turn on and the system will beep.
The LCD display should appear as illustrated below.
UPS
Testing
Step
Code
Battery
V
Hz
A
%
LOAD INPUT
UPS
Battery
V
LOAD INPUT