Nilfisk-Advance CS7000 Fuel Cell EcoFlex, Руководство по обслуживанию

Страница: 320 / 440

Solution System 320 Service Manual – CS7000
Optional High-pressure Spray System (LP and Diesel Only)
The optional high-pressure spray system
uses a separate pump, driven by the
engine via a clutch, to pump solution
at high pressure from the tank to the
hose and wand. The high-pressure spray
system operates independently and has its
own separate filter/strainer, and supply
and return ports on the solution tank.
Solution Level Sensor
The solution pressure sensor sends a linear signal to the A1 Main Machine Controller to indicate the
solution level in the tank. This signal is proportional to the solution level. An icon on the LCD display
indicates the solution level in the tank.
If the solution level has been low longer than 10 seconds, the LCD display will show the solution level low
caution icon. The conditions under which the solution level low icon is displayed depend on the state of the
extended scrub system as follows:
• With the extended scrub system off:
– If the clean solution is low, the solution level low icon will be displayed.
– If the clean solution is not low, the solution level low icon will not be displayed.
• With the extended scrub system on:
– If the extended scrub solution level in the recovery tank is not low, the solution level low icon will not
be displayed.
– If the extended scrub solution level is low but the clean solution level is not low, the solution level low
icon will not be displayed.
– If both the extended scrub and clean solution levels are low, the solution level low icon will be
displayed.