Nilfisk-Advance CS7000 Fuel Cell EcoFlex, Руководство по обслуживанию

Страница: 15 / 440

General Information 15 Service Manual – CS7000
Engine Manufacturers’ Technical Manuals
Engine Model Publication Title
Diesel: D1305-E3B-KEA-1 Kubota WSM Workshop Manual, Diesel Engine,
05-E3B Series, 05-E3BG Series
LPG: WG972-GL-E3-NFK-1 Kubota WSM Workshop Manual, Gasoline, LPG
Engine, WG752-G-E3, WG752-GL-E3, WG972-
G-E3, WG972-GL-E3
LPG
WG972-E4
(LEV):
Kubota Workshop Manual – Gasoline, LPG, NG
Engine WG972-E4 (EFI)
Kubota Diagnostic Manual ECU System
WG972-E4” Code No.9Y110-03110
Conventions
All references to right, left, front and rear in this manual are as seen from the Operator’s seat position.
Parts and Service
Repairs should be performed by an Authorized Nilfisk-Advance Service Center that employs factory-trained
service personnel and maintains an inventory of Nilfisk-Advance original replacement parts and accessories.
Call the Nilfisk-Advance Dealer named below for repair parts or service. Please specify the Model Number
(same as the Part Number) and Serial Number when discussing your machine.
(Dealer, affix service sticker here.)
*Note: On Fuel Cell models, all issues related to the fuel cell must be referred to Plug Power, not
Nilfisk-Advance.
Nameplate
The Part (Model) Number and Serial Number of your
machine are shown on the Nameplate located on the top of
the machine frame, at the left rear side of the machine
underneath the recovery tank. To access the Nameplate, tip
the recovery tank out away from the machine.
This information is needed when ordering repair parts for the
machine.