Nilfisk-Advance 56108110 SC8000 48 LPG, Руководство по обслуживанию

Страница: 33 / 225

eneral n or ation Service Manual – SC8000
Icon Condition Display Icon
Diesel Glow Plug
Start
The key switch is in the run position and
the glow plugs are activated (heating up)
for their timed 10 seconds. The engine
can be cranked to start when the yellow
attention light and display icon go out.
Controller Non-critical
Fault
The driver box (main control board)
KDVVHQVHGVSHFL¿FV\VWHPFRPSRQHQW
failure(s) and displays a two-digit number
and the wrench symbol. See the
Control
6\VWHP0DLQ&RQWURO%RDUG)DXOW&RGHV
for a description of the fault codes and
recommended troubleshooting procedures.
Note that when non-critical faults exist,
hour meter will be displayed in rotation with
faults,
300:1
Recovery Tank Full
7KHWDQNÀRDWKDVVHQVHGDKLJKZDWHU
level. The operator needs to empty the
waste water from the tank. If tank is empty
and the icon is displayed, service (clean)
WKHWDQNÀRDWLWFRXOGEHVWXFN$OVR
FKHFNWKHÀRDWFLUFXLWZLULQJIRUDQRSHQ
arnin is la s
([DPSOH7KHPDLQFRQWUROOHUERDUGVKRZVWKHHQJLQHVHUYLFHLFRQ
with a two-digit fault code (38) and wrench symbol. This is a critical
engine fault code that indicates the main control board received a
run-inhibit signal from the ECM (LPG) or governor (diesel) that will
shut down the engine.
Icon Condition Display Icon
3DUNLQJ%UDNH
Engaged
The parking brake is engaged. The icon
and warning light will disappear when the
Operator releases the brake.
Diesel Oil Pressure
Low engine oil pressure in the diesel
engine is sensed. Check for possible
causes for low oil pressure such as
engine crankcase level is low, incorrect oil
viscosity, fault in oil pressure switch S28,
excessive engine wear or defective internal
oil pump (relief valve). Note that this icon
display is for the Kubota diesel engine only.
Warning
Indicator