background image

3

W

A L L

M

O U N T E D

P

R O G R A M M A B L E

I R   K

E Y P A D

S

Y S T E M

Press and Hold Commands

The IntelliPad can differentiate between a normal
press of a key, and a “press and hold” of a key (a
press which lasts for more than one second). This
Press and Hold feature enables the six Source
Select keys and the Power key to be pro-
grammed for up to two functions.

Pre-printed Source Labels

The backlit labels allow you to customize the
keypad to any system with the supplied pre-
printed translucent labels. Labels include stan-
dard audio/video components and IR control-
lable devices, as well as some common and
uncommon names for macro functions.

Quick and Easy Programming

The IntelliPad makes installation fast and simple.
Programming is made easy via programming
push-buttons and LEDs which provide visual
prompts— leading you step-by-step through
the programming process. 

Program Duplication

The memory contents of a programmed keypad
can be transferred directly into another keypad via
a supplied cable—thereby simplifying the pro-
gramming of multiple keypads within a single sys-
tem. Additionally, it is possible to archive and trans-
fer the IntelliPad’s programmed memory using a
personal computer with the optional Windows

®

based IntelliFile® PC Storage and Transfer System.

Integrates With IR Sensors

In an IR repeater system, any IntelliPad may
have an IR sensor connected to it (See page 10,
Figure 6). Hand-held remote controls may be
used in any room equipped with an IR sensor.

Retrofittable for Easy Upgrades

IntelliPad utilizes the same two-conductor
shielded cable as an infrared repeater system—
making it the perfect upgrade solution.

Memory Protection

Each keypad is protected against accidental loss of
program memory by a ten-year backup battery.

Instant Color Changes

Removable Decora

®

style color inserts make on-

site color changes a snap. Both bone and white
colors are included with your IntelliPad.

Proudly Made in USA 

The IntelliPad is made in the USA and comes with
a limited two year parts and labor warranty.

DS00154A/IntelliPad  2/5/99 4:32 PM  Page 27

Содержание IntelliPad
































Отзывы: