96
k
To magnify the view in the monitor up to 13 × and check
focus, press the
N
button while rotating the main command
dial.
While the view through the lens is zoomed in, a
navigation window will appear in the bottom right
corner of the display. Use the multi selector to scroll
to areas of the frame not visible in the monitor.
To preview exposure at current settings,
press
J
. In exposure modes other than
h
, exposure can be adjusted by pressing
the
E
button and rotating the main
command dial (note that while exposure
compensation can be adjusted by ±5 EV,
only values between –3 and +3 EV can
be previewed in the monitor).
A
Exposure Preview
Matrix metering is used to set exposure. Exposure can not be
previewed when an optional flash unit is attached, bracketing is in
effect (pg. 130), active D-lighting is on (pg. 181), or shutter speed is
set to
A
or “
p
” (flash sync speed).
A
Remote Cords
If the shutter-release button on a remote cord (available separately; see
pg. 392) is pressed halfway for over a second in tripod mode, it will
activate contrast-detect autofocus. If the remote cord shutter-release
button is pressed all the way down without focusing, focus will not be
adjusted before the picture is taken.
N
button
Main command dial
Содержание D3
