Smart Halter
™
User Guide
Setting Up Your Device
June 2020
Models: NW-1000 and NWC-2000
Page 10 of 38
Connecting Your Device
Once you have successfully assigned your device to a horse via the App, it is time to connect your device to a
WiFi network (2.4 GHz) unless you have already done so in a prior step. Depending upon the cellular strength in
your area there are 2 methods to accomplish this. To determine which method is best for you, place your device
in “Broadcast Mode.” Option 1 is appropriate when you have sufficient cellular coverage (refer to
), whereas option 2 is appropriate even when there is limited or no cellular signal.
NOTE
: Be sure your device is within range of the desired WiFi network (2.4 GHz) and you have that network
password available before proceeding. Your device will
not connect
to WiFi (5.0 GHz) networks.
To initiate Broadcast Mode:
1.
Confirm your device is OFF.
2.
Press and HOLD power button ~10 seconds (release when you see blue LED).
3.
Proceed with option 1 or 2 (below) once the LED starts to blink blue indicating your device is
broadcasting.
NOTE:
It may take several minutes for the LED to start blinking.
