Nidek Medical AR-600, Руководство оператора

Страница: 43 / 66

6 - 8
6.2 Setting Date and Time
1. Press .
2. Press four times so that the date and time setting mode will be established.
The TV monitor shows “CLOCK SET” while the display panel shows the data with the “year”
blinking. The blinking indicates that the number is changeable.
NOTE
• The clock stops during date and time setting. It restarts when the setting mode is
released by pressing or .
3. Press the start button to blink the position that you want to change.
The blinking order is as follows.
Year
→
Month
→
Day
→
Hour
→
Minutes
→
Year
→
•••
4. Press or to change the setting.
.......... The number increases.
.......... The number decreases.
5. Repeat steps 3. and 4. to set whole contents of date and time.
6. After setting desired parameters, press to release the mode.
If you press instead of , the mode returns to the parameter setting mode 1.
NOTE
• The internal clock will be working even though the power is cut off due to an internal
battery. If the date and time setting goes wrong, recharge the battery.
(See page 6-3, *1)
Year Month Day Hour Minute