Nidek Medical AR-600, Руководство оператора

Страница: 42 / 66

6 - 7
< Setting Mode 4 >
* The underlined items indicate factory-settings.
[Item No. 31] Selection of whether or not to use the Auto-OFF function. When set to “YES” and
there is no operation for more than 5 minutes, the TV monitor turns off automatically
and the memory indicator blinks. The monitor ON condition recovers by pressing
any button.
[Item No. 32] Selection of whether or not to print error message for AR measurement.
[Item No. 33] Selection of whether or not to display and print error code for AR measurement.
[Item No. 34] Selection of whether or not to display and print error data of AR measurement.
(When set to “YES”, “Err” appears after erroneous measurement and then the data
blinks to show that it is an error data.)
[Item No. 35] Setting related to the lensmeter to be connected to side.*
1
Never change the
setting.
[Item No. 36] Selection of whether or not to print the communication data for the lensmeter
connected to side by the printer built in the AR.*
1
When the parameter is set to “YES”, the printout of the data will come out from the
printer by pressing the print button of the lensmeter. Use the lensmeter provided
with the function of printing out the communication data. For details, refer to
Operator’s Manual of the lensmeter.
*1 side of the AR cannot be used if the AR is equipped with an optional IC card Reader/
Writer.
No. Items Contents
31 TV Auto-OFF YES / NO
32 Error Print YES / NO
33 Error Code YES / NO
34 Error Data YES / NO
35 IN port (LM) NIDEK
36 LM Data Prt. YES / NO
37
38
39
40