Nidek Medical AR-600, Руководство оператора

Страница: 20 / 66

3 - 4
CYL Mode Changing Switch
Changes the cylinder mode, the reading di-
rection of cylinder data.
+ mode ....... Cylinder data will be indicated
by + reading.
- mode ........ Cylinder data will be indicated
by - reading.
MIX mode .. Cylinder data will be indicated
by + reading when the refractive
power is positive for any axis
angle. In other cases, cylinder
data will be indicated by - read-
ing.
• The cylinder mode can be changed even after
measurement.
• Data will be printed out with the mode status
at the time of printout.
Min. Pupil Mark
Indicates the minimum pupil size measurable.
The instrument may not perform measure-
ment when the measuring eye is smaller than
this mark or eyelash is on this mark.
Cylinder Mode Indication
Indicates the current cylinder mode.
Target
Used as a guide to place the patient’s eye in
the center of the TV monitor.
Alignment Light
Should be in focus and be placed in the target
at measurement.
Contrast Control
Used to adjust the contrast of the TV moni-
tor.
Brightness Control
Used to adjust the brightness of the TV moni-
tor.
Setting Switch
Used when setting system parameters, setting
date and time, and writing comments.
Eyeprint Switch
Prints only the basic results and an Eyeprint,
which graphically shows the refractive status
of the eye, by pressing it after measurement.
The eyeprint will be printed out regardless of
the settings in system parameter. Also, used
to select one of parameter setting modes or
date & time setting mode.