Nidec NVS-07, Инструкция по эксплуатации

Страница: 6 / 48

5
Warning
CAUTION
Power cord and plug
Periodically remove dust on the power cord.
Accumulated dust could result in insulation failure due to moisture,
which could result in fire.
Ground the unit.
Be sure to ground the unit to avoid electric shock.
Do not touch switches and plugs with wet
hands.
Operating switches, plugging and unplugging the power cord with
wet hands could result in electric shock. If there is any clay on
them, remove it.
Foreign materials
Do not put metals and/or other flammable
materials inside the unit.
Doing so could result in electric shock and/or fire.
Installation
This unit is heavy. Pay attention when
handling.
Do not attempt to unpack this unit by yourself. Have three or more
people help unpack and/or move this unit. Excess strain could
cause injury. This unit is heavy, dropping it could result in injury.
Operation
Pay attention to loose fitting clothing,
accessories, and/or long hair.
Before operating this unit, be sure to remove or secure dangling
items such as loose clothing, jewelry, scarves, etc. Long hair
should be tied in back as well. Failure to do so may result in
getting caught in moving parts during operation.
Be careful when handling the hopper cover.
Be careful not to get fingers, hands and/or arms caught in the
hopper cover.
Securely hold the handle, and slowly open/close the cover. Do not
remove your hand from the handle while opening/closing.
When the unit is not being used, open up the
vacuum pressure relief valve.
When the unit is not in use or when the vacuum is not needed
during the mixing process, be sure to open the pressure relief
valve. If any gases are generated during the processes of mixing
and pugging, pressure can build up inside the hopper.
Operation
Do not modify the unit. Do not use it for
purposes other than pottery making.
Do not use a modified unit. Do not use the unit for other purposes
than mixing or pugging pottery clay. Failure to follow this could
result in malfunction and/or accident.
User limitation
In facilities where multiple people use this unit, designate a person
to supervise the pugmill’s use. Never allow anyone who is
unfamiliar with this unit to operate it. Everyone who has access to
use the pug mill should have a complete understaning of the
instruction manual.
Do not put hands into the clay extruding
slot.
Never put fingers or hands into the nozzle end of the pugmill.
Failure to do so could cause fingers and hands to get caught, and
result in injury.
Power cord and plug
Do not obstruct access to the power cord or
plug.
Failure to follow this could prevent you from easily unplugging the
power cord or plug in an emergency.
When the unit is not being used, turn the
power OFF.
When the unit is not being used for an extended period of time, or
there is a possibility of lighting, turn OFF the power as well as
unplugging the unit from the outlet.
Maintenance
Turn the power OFF and unplug the unit
before inspection or other relevant
circumstances.
Before cleaning, inspecting, adjusting or other replacement
procedures, turn OFF the power as well as unplug the unit from
the outlet.
Never pour water direct on the unit to clean.
Never pour water directly on the pugmill to clean it. Doing so
could result in electric leakage and/or malfunction. To clean, wipe
off the unit with a damp sponge, towel, etc.
* Only the auger screw and nozzle can be cleaned directly with
water after being fully disassembled.
English