Nidec NVS-07, Инструкция по эксплуатации

Страница: 5 / 48

4
We categorize the type of those precautions using the following symbols throughout the manual.
Before installing, operating or servicing this unit, please read the instruction manual carefully
and follow it for proper use. Start using only after you have read about the equipment’s
functions, safety information and precautions.
This instruction manual provides two grades of safety warnings: “Warning” and “Caution”.
Each of them is an important description related to safety. Be sure to follow them.
This indicates the possibility of severe injury or even death, and fire if a user
disregards the instruction and operates the unit improperly.
This indicates the possibility of injury or damage if a user operates the unit
improperly. However, depending on the circumstances, there is still the
possibility that severe injury may result.
Caution
Warning
Warning
English
Safety Precautions
Be sure to observe
A prohibited action you must not do.
A reminder to pay close attention.
An action you must always do.
Malfunctions
In the event of any malfunction, stop using
the unit immediately.
When a malfunction occurs, unplug the power cord. Failure to
follow this could result in fire and/or injury due to electric shock
and/or leakage.
• Smoke and/or abnormal smell/sound is detected.
• The unit has become deformed and/or parts are damaged.
• The auger screw continues to run even when the hopper cover is
opened.
Installation
Install the unit on a level surface.
Installing the unit on an uneven or sloped surface could cause the
unit to fall, which may result in injury.
Avoid installing the unit in places exposed to
rain, standing water and/or high humidity.
Insulation failure could result in fire and/or injury due to electric
shock and/or leakage.
Power Cord and Plug
Do not use the unit if the power cord or plug
is damaged.
If the power cord or plug is damaged, or does not fit securely in
the outlet, do not use the unit. Failure to follow this could result in
fire due to electric shock and/or short circuit.
* If the power cord is damaged, please contact your dealer or our
office.
Do not overload the electric circuit.
If you share the outlet with other electric units, an overload could
result in fire.
Do not use the unit a voltage other than AC
230V.
Doing so could result in electric shock and/or fire.
Do not take any actions that could result in
damage to the power cord.
Do not pull, break, fabricate, and/or forcibly bend the power cord. Do
not move it close to any heating source, or place heavy materials on
it. Failure to follow this could result in electric shock and/or fire.