background image

2018.11 / m

2

Electric Power Generation

Installation and maintenance

LSA 40

Low Voltage Alternators - 4 pole

4455 en -

SAFETY MEASURES

Before using your machine for the first time, 

it is important to read the whole of this 

installation and maintenance manual.
All necessary operations and interventions 

on this machine must be performed by a 

qualified technician.
Our technical support service will be pleased 

to provide any additional information you 

may require.
The various operations described in this 

manual are accompanied by recom-

mendations or symbols to alert the user to 

potential risks of accidents. It is vital that 

you understand and take notice of the 

following warning symbols.

Warning symbol for an operation capable 

of damaging or destroying the machine 

or surrounding equipment.

Warning symbol for general danger to 

personnel. 

Warning symbol for electrical danger to 

personnel.

SAFETY INSTRUCTIONS

We wish to draw your attention to the 

following 2 safety measures which must be 

complied with:

a) During operation, do not allow anyone 

to stand in front of the air outlet guards, 

in case anything is ejected from them.

b) Do not allow children younger than 14 

to go near the air outlet guards.

A set of self-adhesive stickers depicting the 

various warning symbols is included with 

this maintenance manual. They should be 

positioned as shown in the drawing below 

once the machine has been fully installed.

WARNING
The alternators must not be put into 

service until the machines in which they 

are to be incorporated have been 

declared compliant with Directives EC 

and plus any other directives that may be 

applicable.

This manual is to be given to the end 

user.

The range of electric alternators and 

their derivatives, manufactured by us or 

on our behalf, comply with the technical 

requirements of the customs Union 

directives (EAC).

© - We reserve the right to modify the 

characteristics of this product at any time in 

order to incorporate the latest technological 

developments. The information contained 

in this document may therefore be changed 

without notice.
This document may not be reproduced in 

any form without prior authorisation.

All brands and models have been registered 

and patents applied for.

WARNING

This manual concerns the alternator which you have just purchased.

We wish to draw your attention to the contents of this maintenance manual. 

Содержание LEROY-SOMER LSA 40





























Отзывы: