![background image](http://html1.mh-extra.com/html/nidec/dynagear-d115/dynagear-d115_installation-and-operating-instructions-manual_1687858007.webp)
www.graessner.de
gmb / BA DynaGear_EN
Page 7 of 22
DynaGear High Ratio D55HR to D190HR
Output with solid shaft and hollow shaft
Drive with planetary gear stage for motor shaft and drive flange
Shown: HR Series 18:1 1L with solid shaft
and planetary gear stage
Shown: HR Series 18:1 1LSV with hollow shaft
and planetary gear stage
DynaGear Economy DE-DG
Output in solid shaft and hollow shaft design, corresponding to the standard DynaGear type series
Hollow shaft extended for shrink disk
DynaGear Economy DE-PL
Output in solid shaft, the dimensions correspond to those of a standard planetary gear unit
Shown: Type series DE-PL 8:1 1L with solid shaft at the
output. This corresponds to that of a standard planetary
gear unit. Therefore, it is possible to replace a planetary
gear unit with a DynaGear Economy DE-PL.
Shown: Type series DE-DG 8:1 1LSV with hollow shaft.
Attachment on side 1, shrink disk seat on side 3.