manualshive.com logo in svg

Nidec Digitax ST Indexer, Руководство пользователя, Страница: 66 / 132

Поделиться
Скачать
Nidec Digitax ST Indexer Скачать руководство пользователя страница 66

66

                                                          SM-Applications Modules & Motion Processors User Guide

Issue Number:  4

This parameter shows the status of the Second Processor in the Inter-option module 
synchronization scheme. For more information refer to Chapter 10

Inter-option 

Synchronization

on page 104

Pr 91.22

Inter-option Synchronization Status

Access

RO

Range

Unsigned 8-bit

Default

N/A

Update Rate

Immediate

Bit

Meaning

Description

0

Requested Inter-Module 
Synchronization Role

This is identical to bit 1 of the Inter-Option Module 
Synchronization Control Parameter as described 
above.

1

Requested Inter-Module 
Synchronization Role

This is identical to bit 0 of the Inter-Option Module 
Synchronization Control Parameter as described 
above.

2

Inter-Module Synchronization 
Role Achieved

This bit indicates that for a module attempting to 
become inter-module synchronization Producer it 
has achieved that role. In the event of more than 
one module on a given drive attempting to become 
the synchronization Producer at least one of these 
modules will have this bit clear. For a module 
attempting to become inter-module 
synchronization Consumer it indicates that it has 
not requested to become Producer, and that a 
Producer has been located in another slot and is 
being used as the source of synchronization data. 
(If a Producer has been located in another slot but 
the rate of the synchronization data is not 
compatible with the Consumer then this bit will be 
cleared because the Producer - although located - 
is not being used as the source of synchronization 
data.)

3

Synchronization Producer 
Output within Specification

This bit is relevant only for modules which have 
been designated as the inter-option module 
synchronization Producer and CTSync Slave. This 
bit indicates that the signal being provided by the 
inter-option module synchronization Producer is 
within the specified tolerance of the drive, and that 
the drive is now locked to the CTSync Slave’s 
frequency. Note that this bit may only be set if bits 
2 to 0 of this parameter are 1,0,1, indicating that 
the module is Producer (0,1) and that the Producer 
role has been achieved (1).

7 to 4

Reserved

Read as zero

Apps

Apps Lite Apps Plus

Lite V2

ST Plus

ST Indexer

Содержание Digitax ST Indexer





































































































































Отзывы:

Нет отзывов