LIT-218
NICO
Corporation
Rev. C
(English)
Page 13 of 22
6.2.1.7 DIMMER CALIBRATION ERROR
On start-up the system calibrates the dimmer plate position. If the process fails, this
screen will display and the lamp will not ignite. Turn off and restart the illuminator. If the
fault persists the unit needs servicing.
6.2.1.8
LAMP FAULT
Lamp will not strike or stay lit. Replace the lamp. If the fault persists the unit needs
servicing.
6.2.1.9 LAMP COMMUNICATION FAULT
This screen is displayed when the control system does not get a response from the lamp
during startup. Turn off and restart the illuminator. If the fault persists the unit needs
servicing.